RIC-S228E
Kitchen Use Double-Burner Induction Cooker (13A/Suitable for Large Cabinet)
HK$ 4,430

Highlights

  • MEEL Grade 2
  • Built-in or Free-standing installation
  • Rated Power: 2.8kW
  • Independent left or right IH cooking zone(MAX.): 2.8kW
  • 8-Level power and temperature controls (power sharing)
  • 5 years warranty

Feature

  • MEEL Grade 2
  • Built-in or Free-standing installation
  • Rated Power: 2.8kW
  • Independent left or right IH cooking zone(MAX.): 2.8kW
  • 8-Level power and temperature controls (power sharing)
  • 8 hours timer
  • Electronic sensor & LED control panel
  • Elegant Japanese crystalized glass plate
  • Automatic overheat protection
  • Child safety lock
  • Top plate residual heat indication
  • Utensil sensor
  • Intelligent protection for continuous standalone cooking
  • Cooling fan prolong operation
  • Double operation mechanism to prohibit accident switch on
  • Error indication
  • Multi-function buzzer
  • Small objects recognition feature (prevent accidental heating)
  • Dimensions (approx.):(WxDxH) 735 x 435 x 80 mm
  • Hole Size (WxD): 685 x 415mm* (Only applicable for built-in installation)
  • 5 years warranty
  • * Compactable for RA-IC281DTA or RIC-S228DN to replace as RIC-S228E
  • * Customers who are now using RA-IC281DTA or RIC-S228DN and planning to install RIC-S228E, installation must be completed by Shun Hing Electric Service Centre Limited installation department in order to fit the original hole size. For enquiries, please contact installation department hotline at 2406 5666.

Specifications

RIC-S228E
RIC-S228E
MEEL Grade 2
Rated Power 2800 Watt (W)
Rated Voltage 220V~ 50Hz
Heat Adjustment 8 Level (power sharing)
Control Panel Electronic sensor & LED display
Timer Function 8 hours
Temperature Adjustment 8 Level
Top Plate Anti-slip Crystallized Glass Top Surface
Overheat Protection
Child safety lock
Current Requirement 13 Ampere (A)
Power source requirement Connect from the provided power cord with the plug of the induction cooker to 13A socket. If connection to fixed wiring is needed, connection must be incorporating a switch with 13A or above in accordance with electricity ordinance.
No installation service is needed for free-standing.
Installation Requirements Leaving at least 100mm space at the sides , front and back from the wall.
For built-in installation, other than above conditions, please also leaving an air inlet/ outlet space at least 150mm height and 80cm2.
Cut-hole Dimensions (W x D) 685 x 415 mm
Installation Free-standing or Built-in design
Unit dimensions (Approx.) (W x D x H) 735 x 435 x 80 mm

Close